Equiptment
Making your first project can be accomplished with a minimum of equiptment, however, the items listed below will help make your project easier, and improve the level of finish.
 |
KYDEX® sheet Press made at home |
| Here is an improvised KYDEX® sheet Press that I use, and it works so well, I have no need to make a better one. | |
| tags • homemade • press • diy | |
 |
Toaster Oven - Even heat |
| This is the family toaster oven, one of the best ways to form KYDEX® sheet out in your workshop. | |
| tags • toaster • shaping • heat | |
 |
Eyelet or Rivet Set |
| This is the inexpensive way to put rivets or eyelets into your KYDEX® sheet projects | |
| tags • eyelet • rivet | |
 |
Table Sanding station |
| A not completely unecissary tool that makes the job much easier. | |
| tags • sanding • finishing • shaping | |
 |
Metalic Sharpie Marker writes in Silver |
| This new sharpie writes and stays on KYDEX® sheet, and since it is silver it shows up well. | |
| tags • sharpie • outline • plans • equiptment | |
 |
Templates |
| Templates are commonly used pieces that you wrap the KYDEX® sheet around to form it. | |
| tags • shaping • thermoplastic • templates • equiptment | |
 |
Heat Gun |
| A tool for Shaping KYDEX® sheet | |
| tags • shaping • thermoplastic • heat • equiptment | |
 |
Sanding Films |
| he final step before using your KYDEX® sheet Project. Finish sanding may not alway be fun, but it really makes a huge difference in the look of your project | |
| tags • sanding • films • finishing | |
 |
Dremel - all purpose tool |
| When I started working with Kydex, I only had a dremel for a sander, and used it from start to finish | |
| tags • dremel • sanding • finishing • equiptment • cutting | |
 |
Craftsman 14 Inch Bandsaw |
| Bandsaws are in my opinion the easiest way of cutting KYDEX® sheet into whatever shape you like | |
| tags • thermoplastic • shaping • cutting • equiptment • bandsaw | |
 |
Welding Gloves |
| Hold the KYDEX® sheet as long as you like. When forming with the heat gun, my process relies on the welding gloves | |
| tags • welding • gloves • shaping | |
 |
Counter Sink - clean up those holes! |
| This can be used to remove the burrs from around the holes you drill. | |
| tags • drilling • eyelets | |